We all want the best of everything for our dream house. This includes using the best utilities, bathroom fixtures, decor aesthetics, among many others. The truth of the matter is that all the best things in the world can be bought but there are a certain amount of love and care that will be required to be able to nurture your house, even if it is to care about what you might call as insignificant, that is, your bathroom and kitchen sink faucets. Visit oltsw.com to know more about faucets.

Guide For Cleaning And Maintenance Of Faucets

The guide is an attempt to produce a structured system aimed at preparing you for a deep cleaning project and to walk you through every phase of the cleaning process. As you read through till the end of the guide, make sure you pen down all the ingredients that you will require in this process. Let’s commence from the beginning by learning about the basics of cleaning.

General Information About The Basics Of Cleaning

Why we believe that learning the basics of cleaning is important is because this is where you learn which chemical to use or not. This is primal in the sense that if you randomly choose to work with any chemical cleanser that you get in the convenience store, you might end up ruining the entire beauty of your beautiful faucets.

As your first step, pick out a mild cleanser. You can also choose to use a window cleanser for this purpose. Mix it with water and then start rubbing the faucets by first applying the soap water on them. The solution used is not able to remove hard stains if there is one at all. It is simply done to remove the everyday dirt that might have fallen over the faucets.

A Perfect Solution For Stains

It is when you say ‘yes’ to a deep cleaning routine that will help you successfully get rid of stubborn stains. Kiss the stains goodbye and transform them to make it look like a brand new bathroom.

It is pretty simple. Just grab some white vinegar that is chemically acetic acid. The other things that you will require are some clean water and a dry microfiber cloth. This is a DIY guide wherein you put your muscles into action. Your house guests won’t be able to advise on such matters anymore.

There are certain things that you need to be careful of, however. First of all, the concentration of each ingredient, that is water and vinegar, must be equal.

Third of all, use glass containers. Glass containers will not be able to participate in any reaction, unlike metallic containers that have a high propensity to react to acetic conditions. Apply it on a washcloth and repeat the same process as above. Do not forget to rinse and suck out the excess water.

Use A Brush To Clean The Tricky Areas.

Toothbrushes are mighty helpful for reaching places that our fingers cannot reach. Getting tricky places cleaned using tools that we already possess can be fun and innovative. All these places can be easily cleaned with a toothbrush and if you have old toothbrushes, we are definitely good to go.

Even though you have paid enough money to buy the same, it is in the maintenance that will ensure its durability during the course of your lifetime. So, refrain from complaining later by learning how to clean with a toothbrush.

Use a toothbrush and rub it on a surface with soap until it lathers. Once the lather starts forming, go ahead and rub those unreachable areas and around the edges for a clean-up. If the exterior of these facets is delicate and are prone to scratches, use a thin microfiber cloth and dab it in soapy water.

Once it is moderately wet, put the cloth through the hole and then you can pull it near and away from your body to clean it. This way, the area inside the hole gets cleaned without making a single scratch on the metal.

What About The Drain Area Of Your Bathroom Sink

This one is seriously a no-brainer. We are sure that none of our readers could have ever taken the drain area casually. It is probably one of the dirtiest areas of the sink.

One must not also forget the aerator that helps the incoming water to mix with air so as to ensure a steady and smooth flow of the water. It has a fancy name, but it is a drain, whatsoever.

As for the drain, it is important that we separate the filter since it is to be washed and cleaned separately. It has the maximum amount of grime and debris deposition. Place the filter in a water container that is filled with acetic acid or vinegar-water solution for nearly 15 to 20 minutes.

Once the timer goes off, rinse it out with clean water and place it back to the drain. The same is to be repeated for the aerator and its individual parts too. Drain cleaning involves the same cleaning processes with a toothbrush as mentioned above, but only this time with an abrasive soap.

Conclusion

While finding the motivation to opt for a deep cleaning routine is hard, this DIY step-to-step guide will help you schedule the timing accurately.